Detail

Select  

Products Line Up > Rubber Joint

OFLEX

 A joint reliance TOZEN

    

     Single-Sphere Flexible Rubber Joint with Floating Flanges

  O FLEX

 

 

Pursuing the TOZEN spirit, “A joint reliance”,
TOZEN’s rubber joint OFLEX ensures ease of use.

 

 

    Feature

Achievements
Having been used in more than 20 countries for over 30 years, TOZEN brand products proudly demonstrate their popularity.
Reliability
Unparalleled durability is guaranteed by the distinctive and strict design standards of TOZEN.
Quality
Manufactured in TOZEN’s own factory under thorough control with ISO9001 quality management system.
Durability
Reciprocating pressure test for 20,000 cycles or above.
 

 

    Applications
● This product is mainly applicable for piping systems in commercial and industrial buildings and plants.
● Applicable fluids are exclusively water including cold water, warm water, cooled water, sea water, etc.
● This product can not be used for drinking water, pool water, oil, or boiled water.
 

 

 

  

   Dimensions and Allowable Movements
Nominal Dia. Dimension　[mm] Mass
[Kg]		 Allowable Movement　[mm] Installation Tolerances　[mm]
mm  inch  L φd T.M A.E A.C. A.M. T.M. A.E. A.C. A.M.
32 1 1/4  125 35 3.1 10 6 10 10° 4 3 6 5°
40 1 1/2  125 35 3.7 10 6 10 10° 4 3 6 5°
50 2  125 45 4.9 10 7 10 10° 4 3 6 5°
65 2 1/2 125 60 5.8 10 7 10 10° 4 3 6 5°
80 3 125 70 7.2 10 7 10 10° 4 3 6 5°
100 4  150 95 8.1 10 10 10 7° 4 3 6 3°
125 5  175 120 11 10 10 10 7° 4 3 6 3°
150 6  200 145 14 10 12 10 5° 4 3 6 2°
200 8  200 195 20 10 12 10 5° 4 3 6 2°
250 10  250 245 28 10 15 10 5° 4 3 6 2°
300 12  250 290 37 10 15 10 5° 4 3 6 2°
                         

 

・A.C.: Axial Compression, A.E.: Axial Elongation, A.M.: Angular Movement, T.M.: Transverse Movement

Single-Sphere Flexible Rubber Joint with Floating Flanges OFLEX:Pursuing the TOZEN spirit, “A joint reliance”,TOZEN’s rubber joint OFLEX ensures ease of use.
・Mass indicates only the case with PN16(Mild Steel) flanges.
・Products should be used within the given allowable movements only.
・Tolerances for installation are included in the allowable movements (Allowable movements = Tolerances for installation + Operating movements).
・Please note that the information in the above table is for single movement only.
 In case of complex movements, please do adjustment by using the following formula.
  C.A.E. (C.A.C.) = A.A.E.(A.A.C.) × {1-(T.M./A.T.M. + A.M./A.A.M.)}
　C.A.E. (C.A.C.): Correct Elongation Movement (Correct Compression Movement)
　A.A.E. (A.A.C.): Allowable Elongation Movement (Allowable Compression Movement)
　A.T.M.: Allowable Transverse Movement
　A.A.M.: Allowable Angular Movement
Example: In case of 100mm joint, if 5mm transverse movement is needed, then the correct elongation should be: C.A.E = 10 × {1- (5/10 + 0/7)} = 5mm
・There is reaction force from rubber joints due to the load of the internal pressure, so during the installation, please fix the pipe tightly to ensure the joints work efficiently. In case the pipe cannot be fixed tightly, please use the control unit for the joints.

 

 Single-Sphere Flexible Rubber Joint with Floating Flanges OFLEX:Pursuing the TOZEN spirit, “A joint reliance”,TOZEN’s rubber joint OFLEX ensures ease of use.

Single-Sphere Flexible Rubber Joint with Floating Flanges OFLEX:Pursuing the TOZEN spirit, “A joint reliance”,TOZEN’s rubber joint OFLEX ensures ease of use. 

 

 

 Note：The contents of this catalogue are subject to change without notice.

 

Select  
Select and click catalogue request button, and the page you checked can be all downloaded.
CORPORATE GOVERNANCE